Product Description :Staroxy prime 51( zn) zinc is a two component solvent free epoxy structural coating system. It is high solid (82%), high build (150 micron per coat) low VOC surface tolerant semi-gloss epoxy. It is having excellent chemical and corrosion resistance with excellent bonding to metal surface when properly prepared. Passes 3000 hrs salt spray testing.
Based on epoxy resins and Polyamide type Hardener and suitable corrosion inhibitive Pigments & Extenders.

Features :
● Self Priming maintenance coating for coastal area. ● Tolerant to lower grade of surface preparation. ● High volume solids leading to high build-up of DFT per coat. ● Good chemical resistance ● Excellent Corrosion Resistance

Physical Characteristics :
Mixing Ratio : Base : Hardener (4:1) (BY VOLUME)
Application : By Brush
Maturation Time : 15 – 20 Minutes
Pot Life (of Mixture) : 2 Hours
Drying (Surface Dry ) : 2 – 4 hrs.
Hard Dry : Overnight
Full curing : 7 Days
Over Coating : Super Epoxy, Autocoat Polyurethane Paint
DFT per coat : 100 – 150 microns
Overcoating Interval : Overnight
Adhesion : Excellent
Shelf life : 6 Months
Remark : Stir well before mixing
Packing : 20 LTRS
Colours : Grey – Self Standard
Appearance : Highly Viscous thixotropic
Finish : Smooth, Uniform
Volume Solid : 82 ± 3%
Gloss : Semi-Glossy

Storage & Handling:
The product should be stored in accordance with national regulations. It should be kept in a cool, well ventilated area, away from heat, direct sunlight, sparks and children. Handle with care. Mix resin and hardener as per the ratio. Use the mix solution within the pot life time.

Packaging
available in 20 kgs packs and has a maximum shelf life of 12 months in the un-opened condition

Handling & Safety
Observe reasonable care and employ ordinary hygienic principles such as washing the hands with soap and water before eating or smoking. It is recommended to wear gloves, goggles and nose masks while application. Incase of splashes on the skin, dampen the cloth with thinner and wipe the hands with the cloth. Wash then with soap and water. Dried film is non toxic. Incase of contact with eyes, rinse with plenty of water and seek medical advice. Incase of continuous exposure to vapours, the applicator should be immediately moved to get fresh air.

Download to Safety Data Sheet