Product Description :Whether commercial or industrial, concrete floors are porous by nature. Without the proper protective coating, solvents, acids, alkalis, and other compounds can be absorbed by the concrete slab and deteriorate it from within—they may even flow straight through and contaminate the soil underneath. Our full line of chemical resistant flooring & coatings protects both your concrete floor and the environment around it, helping prevent damage from exposure to corrosive compounds. These flooring systems are used in commercial kitchens and laboratories, food production facilities, manufacturing plants and other environments, and they can give you the lasting protection you need for your business, too.

Facility Safety and Environmental Responsibility : we manufacture a variety of specialized industrial concrete floor systems that are impervious to many of the chemicals used in commercial and industrial operations.
By making it easier to isolate, clean up and contain hazardous substances, these high performance, chemical resistant floorings & coatings help keep your facility, employees, surrounding community and the environment safer.

Advantages:
● Floor toppings resistant to high concentration acids and alkalis ● Concrete coatings resistant to solvents ● Finishes that protect floors from vehicle fluids, fuels, Skydrol, grease and oils ● Broad-spectrum industrial chemical resistance ● Resistance to stains from tires and betadine ● Customizable skid resistance ● Floors that meet USDA requirements ● Optional Floor-Septic antimicrobial protection ● Floor Proof moisture vapour mitigation

Physical Characteristics :
Density 2000 kg/cm3
Compressive Strength :800-900 kg/cm2
Flexural Strength :300 – 350 kg/cm2
Modules of Elasticity: 15 x 10-4 kg/cm2
Coefficient of linear thermal expansion: 10-6 cm /cmo C
Abrasion resistance (Taber Abrasor): 0.500 cm3

Chemical Resistance :
The designations of the hereunder given schedule of resistance mean :
A = completely resistant ,
B = application limited, C = a very marked attack or a destruction.

Sulphuric Acid (upto 70% conc.) :A
Sodium Hypochlorite (15%): A
Hydrochloric Acid (conc.): A

Sodium / Potassium Cyanides: A
Hydrofluoric Acid (upto 10%): A
Calcium Hydroxide (conc): A
Nitric Acid (upto 40%): A
Dichloroethylene (EDC): C
Oxalic Acid (all): A
Benzene: C
Acetic Acid (Upto 50%): A
Toluene: B
Formic Acid: A
Acetone (Upto 10%): A
Lactic Acid: A
Ethyl Alcohol: A
Chromic Acid (upto 20%): A
Methyl Alcohol: C
Phosphoric Acid (Conc): A
Tricholoroethylne: C
Sodium Hydroxide of 20%: A
Chlorinated Hydrocarbons :A
Sodium Hydroxide of 50% :A
Aliphatic Hydrocarbons: A
Ammonia Liquor of 20% :A
Aromatic Hydrocarbons: A
Sodium Carbonate (35%): A

Storage & Self Life:
The product should be stored in accordance with national regulations. It should be kept in a cool, well ventilated area, away from heat, direct sunlight, sparks and children. It contains inflammable solvents. Handle with care. Mix resin and hardener as per the ratio. Use the mix solution within the pot life time.

Packaging
available in 20 kgs packs and has a maximum shelf life of 12 months in the un-opened condition

Safety Precaution:
Swallowed : Rinse mouth and lips with water. Do not induce vomiting. If symptoms persist, seek medical attention.
Eyes : Flush thoroughly with flowing water, while holding eyelids open, for 15 minutes to remove all traces. If symptoms such as irritation or redness persist, seek medical attention.
Skin : Remove heavily contaminated clothing. Wash off skin thoroughly with water. Use a mild soap if available. Shower if necessary. Seek medical attention for persistent redness, irritation or burning of the skin.
Inhaled : Remove to fresh air, away from dusty area. If symptoms persist, seek medical attention.
Advice to Doctor : Treat symptomatically.

Download to Safety Data Sheet