Product Description: Staroxy HG is a three-part self-levelling epoxy screed based on carefully selected solvent less Epoxy resin composition. It is a four component system consisting of base, hardener colour concentrate and formulated aggregates. It is a self levelling composition and forms a very smooth, attractive hygienic, hard wearing and chemical resistant floor topping

Area of Area
Where a requirement for a smooth monolithic surface with good resistance to traffic and corrosive liquids exists, e.g. food, chemical and paper industries.

Application Guidelienes :
1. Surface preparation Surfaces to be coated must be dust free as well as completely dry and free of all curing agents.
2. Priming Primer Part A and B thoroughly and apply as per technical data sheet.
3. Application Using a mechanical mixer, EPO SL until a uniform consistency is obtained. Spread the product evenly trowel followed by a spiked roller to produce the final finish.

Product Features:
● Hygienic – It provides a joint less flooring making it dust free and is easy to clean because of smooth surface.
● Chemical Resistant – It has excellent chemical resistance to most chemicals
● Wear Resistant – It provides a tough floor topping to withstand foot and light vehicular traffic.
● Aesthetics – It is available in various colour shades to provide attractive floor finish.
● Improved flexibility and thermal shock stability
● Good abrasion resistance
● ● Good UV stability

Where it Use:
Staroxy HG is recommended for use where extremely hygienic, abrasion, chemical resistant and dust free environment is required. It is ideally suited for following industries.
● Pharmaceutical Industries
● Electronic Assembly Areas
● Clean Rooms
● Food Processing Industries

Technical Data :
Type :Solvent-less Epoxy
Toxicity : Non toxic when cured (Toxicity of uncured product is greatly improved compared to traditional epoxy compounds particularly from the applicator's view)
Curing Times :7 days
Pot Life :30 Minutes at 23 deg centigrade
Coverage :A5,6m² / kit @ 2mm 3,7m² / kit @ 3mm
Recommended No. of Coats : 1

Storage & Shelf Life :
● Stored unopened in dry conditions under covered space ● Shelf life will be 9 months in unopened condition

Handling & Safety :
Take normal precautions to avoid skin contact. Provide well ventilated conditions or use suitable respiratory protection. Wash thoroughly with a suitable resin removing cream – any areas where product comes into contact with skin followed by washing with soap and water. Splashes in the eyes should be well flushed out at least 10 minutes with water or a proprietary eye wash and medical attention sought. This product is flammable and should be kept away from sparks and naked flames – Smoking is strictly prohibited as product is flammable.

Download to Safety Data Sheet