Product Description :Water-based wall coating suitable for application on exteriors as an undercoat to exterior emulsions.

Advantages:

1. Excellent opacity and whiteness
2. Improves appearance of top coat
3. Does not chalk and can be applied on adequately cured fresh plaster
4. Does not require curing with water

Physical Characteristics :
Colour : Desired shade
Finish : Smooth glossy
Pot life @ 300C ASTM D 2471 : 60 – 90 minutes
Volume solids ASTM D 2697 : 60 ±2%
Drying time: Surface dry time 30 min

Application : By roller / brush

Clean up : equipment with water immediately after use.

Storage & Self Life:
The product should be stored in accordance with national regulations. It should be kept in a cool, well ventilated area, away from heat, direct sunlight, sparks and children. It contains inflammable solvents. Handle with care. Mix resin and hardener as per the ratio. Use the mix solution within the pot life time.

Packaging
Starowall Protect is available in 20 kgs. & 200 kgs. plastic drums

Handling & Safety
• Store the container with the lid tightly closed in an upright position, in a cool, dry place
• Keep out of reach of children and away from food, drink
• May be harmful if swallowed. In case of ingestion seek immediate medical attention.
• Wear eye protection during application. In case of contact with eyes, rinse immediately with
• plenty of water and seek medical advice.
• In case of skin contact immediately wash skin with soap a
• attention if irritation develops or persists.
• Do not breathe vapour or spray.It is recommended to wear suitable nose pad during sanding
• and surface preparation to avoid dust inhalation
• Do not pour leftover paint down the dra
• In the event of spills, contain spillage using sand or earth.

Download to Safety Data Sheet