Product Description :aliphatic polyurethane based roll-on floor coating recommended for external applications. It has excellent adhesion over primed and screeded surfaces and offers excellent resistance to UV radiation to prevent colour fading.

Advantages:

Key features : 1. Light stable 2. Fast curing. 3. Good abrasion resistance 4. Good chemical resistance

Advantages :
• Weathering durability, gloss and colour retention
• Non-yellowing and does not chalk easily
• Resistant to splashes of mild, non aggressive chemicals
• Good application properties, flow and levelling
• Long recoatability property, can be recoated even after long exposure

Physical Properties:
•Type : Polyester-aliphatic isocyanate
•Mixing ratio (R:H) : 3 : 1 by volume
•Finish : Glossy
•Colour : Desired shade
•Volume solids: 45 – 50%
•Recommended DFT D 1186: 100 microns
•Drying time ASTM D 1640
•Surface dry: 1-2 hrs
•Tack free dry: 3-4 hrs
•Hard dry: 24 hrs
•Adhesion ASTM D 903 pli: > 30
•Hardness ASTM D 3363: H pencil hardness
•Taber abrasion, g loss; CS-17 Wheel, 1,000 cycles, 1,000 g load ASTM D 4060 0.038

Chemical Resistance: Full chemical resistance is achieved after curing for 7 days.

Storage & Handling:
● Stored unopened in dry conditions under covered space ● Shelf life will be 9 months in unopened condition

Packing size Available in 4ltr/25ltr/200ltr

Handling & Safety
Take normal precautions to avoid skin contact. Provide well ventilated conditions or use suitable respiratory protection. Wash thoroughly with a suitable resin removing cream – any areas where product comes into contact with skin followed by washing with soap and water. Splashes in the eyes should be well flushed out at least 10 minutes with water or a proprietary eye wash and medical attention sought. This product is flammable and should be kept away from sparks and naked flames – Smoking is strictly prohibited as product is flammable.

Download to Safety Data Sheet