Product Description :Staroguard (A-IWC) Royal is an exquisite emulsion paint that provides a luxurious finish and a silky glowing appearance to your walls.

Advantages:

Green Assure The promise of Green Assure from Asian Paints, implies that this product conforms to strict international environmental and safety standards. Low VOC standards and the absence of any harmful chemical results in very low odour.
Surface Protector Surface Protector, fortifies your walls against tough stains, increases durability and reinforces the strength of the paint film. With this quality accreditation of Teflon, Staroguard (A-IWC) Royal is comparable to the best interior emulsions across the world. Teflon Surface Protector has enhanced stain resistance that protects your walls for all kind of stains. The toughest household stains like turmeric and ink are reduced to a large extent, while water based stain like tea, coffee etc are completely removed.
Anti- Bacterial and Anti- Fungal Shield Staroguard (A-IWC) Royal is designed to prevent fungal growth on walls. It also offers a unique anti- bacterial shield that kills 99.8% of micro organisms that come in contact with the wall, making it one of the few elite products that confirm to the Japanese Industrial Standard. .

Advantages :
● Life and durability of the structure is increased. ● Non-yellowing and Anti-fungal. ● Easy application, no machinery required. ● Provides seamless and joint free seal throughout the surface, which is impervious to water ● Low labour cost due to esay, simple and quick application. ● Excellent bonding to most building materials. ● As the system is a water based system it is non-hazardous as compared to solvent based systems and can be used for laying of clean rooms. ● As the molecule size is 0.010 microns it has excellent penetration and sealing capacity and can be used on the base plaster against efflorescence before putty and paint.

Method of use:

1. New masonary surfaces must be allowed to cure completely. It is recommended to allow 28 days as the curing time for new masonary surfaces.
2. CLEANING Surface should be free from any loose paint, dust or grease. Growths of fungus, algae or moss should be removed by wire brushing and water. In case of areas having excessive dampness using Asian Paints Damp Block to limit further dampness. When the underlying surface exhibits chalkiness, in spite of thorough surface cleaning, use Asian Paints.
3. FILLING FOR CRACKS For filling cracks upto 3mm use Crack Seal.

Physical Characteristics :
Drying time: :To be used within 24 hours
Application temperature : Should be above 10 °C Recoating time: 4 to 6 Hrs

Application : By roller / brush

Clean up : equipment with water immediately after use.

Storage & Self Life:
The product should be stored in accordance with national regulations. It should be kept in a cool, well ventilated area, away from heat, direct sunlight, sparks and children. It contains inflammable solvents. Handle with care. Mix resin and hardener as per the ratio. Use the mix solution within the pot life time.

Packaging
Starowall Protect is available in 20 kgs. & 200 kgs. plastic drums

Handling & Safety
1. Keep container tightly closed and keep out of reach children or away from food and drink.
2. Ensure good Ventilation during application and drying.
3. When applying paint, it is advisable to wear eye protection.
4. In case of contact with eye, rinse with plenty of water immediately and seek medical advice.
5. Remove splashes from skin by using soap or water.
6. Paint must always be stored in a cool place.
7. When transporting paint, care must be taken. Always keep container in a secure upright position. Dispose off any paint waste in accordance with the appropriate Environment Quality Regulations

Download to Safety Data Sheet