Stanrose Envirotech India Pvt. Ltd.

Send Enquiry   |   Environment Policy  |   Search Products

An ISO 9001 : 2008 & 14001 : 2004 Certified Company

UNDER LAY EPOXY FLOORING : (Click below to explore)

Stanrose® EPO UL       Stanrose® EPO PRIME
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Stanrose® EPO PRIME                                                                                                                                                                                       
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Product Description :
STANROSE® EPO PRIME (SOLVENTED) : It is a two component solvent based epoxy having excellent bonding to any kind of floors. It has a very fast drying capacity dries within 2 hours of application. It is always suggested to use STANROSE® EPO PRIME - SOLVENTED before any kind of Epoxy Flooring System.

STANROSE® EPO PRIME (SOLVENT FREE) : It is a two component solvent free epoxy having excellent bonding to any kind of floors. It has a very fast drying capacity. It is always suggested to use STANROSE® EPO PRIME - SOLVENT FREE before any kind of Epoxy Flooring System.

STANROSE® EPO PRIME (WATER BASED) : It is a solvent free clear two-pack low viscosity epoxy resin primer. It is used for cementations substrates prior to application of epoxy or polyurethane.

Product Advantages :

S.N STANROSE® EPO PRIME (SOLVENTED) STANROSE® EPO PRIME (SOLVENT FREE) STANROSE® EPO PRIME (WATER BASED)
01 Solvented, two component Epoxy System Solvent free, odourless two component Epoxy System Being water based excellent wetting of cementations surface.
02 Excellent bonding to any non-porous surfaces like tiles, stones, etc. High tolerance upto 70% relative humidity in the concrete. Can be applied on Concrete, Metal, Wood etc.
03 It has excellent adhesion to any substrate. It has excellent adhesion to any substrate. It is Solvent free
04 It also strengthens the top layer of substrate. It also strengthens the top layer of substrate. Gives very good adhesion to the top coat.
05 It has low viscosity with maximum penetration, soaking into the capillary pores. It has low viscosity with maximum penetration, soaking into the capillary pores.  
06 It is compatible with subsequent Epoxy and Polyurethane Top Coats. It is compatible with subsequent Epoxy and Polyurethane Top Coats.  

Physical Characteristics :

  STANROSE® EPO PRIME (SOLV.) STANROSE® EPO PRIME (SOLV. FREE) STANROSE® EPO PRIME (W.B)
Application Brush, Roller Brush, Roller Brush, Roller
Mixing Ratio 2 parts Base to 1 part Hardener by weight 2 parts Base to 1 part Hardener by weight  1 parts Base to 4 part Hardener by weight
Pot Life 35 min. at 25o Cent. 35 min. at 25o Cent. 30 min. at 25o Cent.
Touch Dry Within 30 min. at 25o Cent. 2 hours at 25o Cent. 2 hours at 25o Cent.
Coverage 5 sq. mtr. / kg depending on surface porosity and profile. 3-5sq.mtr./kg depending on surface porosity and profiles Approx.  4-6 sq.mts / Kg /coat depending on substrate porosity, texture, temperature of substrate.
No. of Coat     1

Method of Application :
STANROSE’s system should be installed by approved contractors. Following information should be used as a guideline.

1. Surface Preparation
The long-term durability of the applied STANROSE® EPO PRIME is dependent on the adhesive bond achieved between the flooring material and substrate. It is most important therefore, that substrate surfaces are correctly prepared prior to application.

a) New concrete or cementations substrates should have been placed atleast 28 days.

b) Before application, the surface to be coated, should be free from loose particles, rust, oils, grease, or earlier coatings and should be thoroughly dry.

c) After surface is dry, all repair work like sealing of joints, crack filling of cavities and crevices should be carried out.

d) If the surface is Tremix or smooth surface then Shot Blasting is carried out to make the surface rough in order to enhance the bonding of the primer.

2. Mixing
Pack components are pre-weighed for optimum performance. Never split packs.
Empty contents of Base into a mixing container and pre-mix to assure the suspension of solids.
Add Curing Agent and continue to mix to a uniform consistency for 1-2 minutes.
Mix with slow speed drill and helical spinner head for 2 minutes.

3. Application
STANROSE® EPO PRIME must be applied immediately after mixing the two components.
STANROSE® EPO PRIME is applied with a paint brush or roller to produce a thin film.

Storage & Shelf Life
Store all components of STANROSE® EPO PRIME unopened in shade. Avoid excessive heat. The shelf life is 1 year in original, unopened container.

Handling & Safety
Keep the containers tightly sealed when not in use. Avoid skin contact and inhalation of fumes (if any). While spraying it is advised to wear a mask. If it comes in contact with the body, wash affected parts of plenty of water. In case of persistent irritation, contact a physician.
 

 

The manufacturer reserves the right to change the specifications. Stanrose products are guaranteed against material manufacture and are sold subject to company's Terms and Conditions of Sale. Whilst we endeavour to ensure that advice, specifications, recommendations and information given is correct, we cannot have control over how our products are applied and will not accept liability, directly or indirectly.

 

NAVIGATE

News & Events
Send Enquiry
Channel Partners
Contact Stanrose
Search Products

ABOUT STANROSE

Corporate Profile
Team Stanrose
Infrastructure

Quality Policy
Environment Policy

CREDIT

Copyright -
All rights reserved.

Stanrose Envirotech
India Pvt. Ltd.

UPDATE

For best performance Stanrose recommend you to update your browser.

Internet Explorer   |   Mozilla Firefox   |   Google Chrome

 

Self Leveling Flooring | Under Lay Flooring | Electrostatic Flooring | PU Screed Matt | Concrete Sealer | Concrete Repairing | Car Parking Deck System |
Epoxy Grout
| Water Proofing System | Heat Reflector | Epoxy Coving | PU Wall Coating | PU Wall Guard | PU Re-Finish Coating | Epoxy Rust Protector |
PU Rust Protector
| Epoxy Structure Coating | PU Structure Coating | Anti Fouling Paint | Epoxy IMO | Epoxy CRC | Chemical CRS

Enquiry



























Enquiry