Stanrose Envirotech India Pvt. Ltd.

Send Enquiry   |   Environment Policy  |   Search Products

An ISO 9001 : 2008 & 14001 : 2004 Certified Company

Stanrose® PU Rust Hide                                                                                         
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Product Description : STANROSE® PU RUST HIDE is a high performance two component polyurethane system with very low VOC and 57% volume solid. It is having very high gloss and having compatibility with a huge range of primers and intermediates. Gives 50-75 micron dft per coat. Wonderful finish and having high resistant to UV and chemical attacks.

Type :
High Quality suitable pigments blended in an Acrylic polyol as a base component & cured with separately packed Aliphatic Polyisocyanate hardener.

Features :
It is an excellent PU finish coat with excellent resistance to U.V. radiation. It imparts very good resistance to corrosion & chemical atmosphere. This coating has high degree of colour & gloss retention in natural weathering. It is used as high solids PU topcoat for complete corrosion resistant system.

Recommended Use :
Suitable to use as a topcoat over epoxy primer or epoxy intermediates. Usually recommended to use where good aesthetic value is required combined with excellent natural weathering resistance.

Product Data :

  Colours : White & Selected colours.
  Volume Solids : 45% - 2%
  Finish : Smooth
  Flash Point : Above 20°C
  Drying Time

 
:

 
Surface dry : - 2 - 3 hrs.
(AT AMBIENT TEMPERATURE Hard dry : - 8 - 9 hrs. 30?C & R. HUMIDITY 70%)
Full cure : - 7 days.
  Recoating : Minimum : - 8 hrs.
  Intervals : Maximum : - 48 -72 hrs.

Application :

  Mixing Ratio
 
:
 
Base + Hardener [by volume]
9 + 1
  Pot Life at 30o C : 3 - 4 hrs. max.
  Maturation Time : 10 - 20 minutes.
  Recommended DFT : 40 - 50 μ/ coat.
  Thinner : PU Thinner ST 16/ ST 21
  Theoretical : 9 - 11m2/ ltr per coat at recommended dft.
 

Covering Capacity :

  Application : By Brush, Conventional Spray or Airless Spray.
  Preceding Coat : Super Epoxy or PU primers, Super Epoxy Intermediates MIO considering the surface is clean, free from foreign contaminants & prepared.
  Succeeding Coat : Generally none or same PU topcoat.

Performance Data :

  Adhesion : Passes 100/100 as primer+ topcoat system.
  Flexibility : Passes at 7mm on conical mandrel.
  Scratch Hardness : Passes 2500gms as primer+ topcoat system.
  Impact Resistance : Passes 80 kgcm.
  Corrosion Resistance : Excellent. Passes 500 hrs as system.
  Salt Spray Resistance : Excellent. Passes 500 hrs as system.
  Natural Weathering : Excellent. Passes 600 hrs.
 

NAVIGATE

News & Events
Send Enquiry
Channel Partners
Contact Stanrose
Search Products

ABOUT STANROSE

Corporate Profile
Team Stanrose
Infrastructure

Quality Policy
Environment Policy

CREDIT

Copyright -
All rights reserved.

Stanrose Envirotech
India Pvt. Ltd.

UPDATE

For best performance Stanrose recommend you to update your browser.

Internet Explorer   |   Mozilla Firefox   |   Google Chrome

 

Self Leveling Flooring | Under Lay Flooring | Electrostatic Flooring | PU Screed Matt | Concrete Sealer | Concrete Repairing | Car Parking Deck System |
Epoxy Grout
| Water Proofing System | Heat Reflector | Epoxy Coving | PU Wall Coating | PU Wall Guard | PU Re-Finish Coating | Epoxy Rust Protector |
PU Rust Protector
| Epoxy Structure Coating | PU Structure Coating | Anti Fouling Paint | Epoxy IMO | Epoxy CRC | Chemical CRS

Enquiry



























Enquiry